Tractor Talk Discussion Board |
Re: Value of a Buzz Saw?
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by The Dukester on April 06, 2001 at 15:19:16 from (216.93.119.113):
In Reply to: Value of a Buzz Saw? posted by David A on April 05, 2001 at 13:10:10:
Yeah, there's not much market for these things anymore. Kountry Kollecters like the blade to paint a scene on and hang in homes or restaurants or whatever. Back before chainsaws and even since too, you could trim up the treetops left after a logging operation(the "slash") into "buzzpoles", haul them to an open area, pile them and then use a "buzz-rig" to saw 'em up in a hurry-if you could get three or more guys to do it. It took one super experienced guy to be the sawyer who ran the shelf-like table with the pole(s) on it through the blade using back and forth motions, moving the pole forward about 16-18 inches each time until the pole was all cut up. Another guy was at the pole pile getting another pole and the third guy(who had to pay attention real good) took the cut-off pieces at the saw and threw them in a wagon or truck or in a pile on the ground away from the saw. I worked at all three jobs buzzing wood and never personally saw anyone hurt by the saw blade, I have seen some pinched or smashed fingers, some pretty big chunks of sawdust be extricated out of eyes and had a sore back from this work. About 40 years ago a guy in the area sawed his hand clean off at the wrist and the doctors couldn't re-attatch it. Buzz saws, corn pickers, and mean, nasty bulls used to injure a lot of people in those days.
Follow Ups:
Home
| Forums
Today's Featured Article -
George's Fordson Major - by Anthony West (UK). This is a bit of a technical info to add on to the article about George's Major in the "A Towny Goes Plowing" article. George bought his Major from a an implement sale about 18 years ago for £200.00. There is no known history regarding its origins or what service it had done, but the following work was undertaken by Harold alone to bring it up to show standard. From the engine number, it was found that the major was produced late 19
... [Read Article]
Latest Ad:
18-32 Case Cross Motor
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|