Posted by tjdub on June 25, 2010 at 14:43:19 from (208.28.88.253):
In Reply to: erotic bales.... posted by dave2 on June 24, 2010 at 22:30:35:
Here's what happens on my JD 24T. The bale size is determined by gear that's driven by the bales as they pass. This gear drives a roller up a slide arm that trips when it hits a notch. This triggers the bale tie. Well, when you're baling really fluffy or thin hay, it ends up running up this slide too fast because the hay bounces back after every compression. That is, the gear goes ahead an inch, but then goes back 1/8 inch. The slide doesn't run backwards even if the gear does, so you end up running through the slide faster than you should. As long as you keep plenty of hay feeding through, it's less of an issue, but if I run around the field after I'm done baling to pick up tufts of hay I missed, I make half-sized bales. Also, bumpy ground seems to play into the problem.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
