Are you running it as a single acting with one hose or double acting with 2 hoses? if dounle you will not have to worry about oil supply as the return side of cylinder will replace any used for raising. Now on our 41 H that we had years ago we ran a single acting cylinder with it of 3" on a 9" haybine but ours lifted only the platform. On models that lifted the whole machine we would have needed a 4" cylinder. And the cylinder is not measured by rod size as that should remain between 1" and 1 1/8" depending on cylinder model, you are just using the piston diameter or bore size to get either the 2", 3" or 4" size. Disk will need the 3" or possibly the 4 depending on disk, thinking the 3" will be ok on disk but sounds like you have the type of haybine that lifts the entire machine and then you will need a 4" on it and it will be verry slow, the larger the cylinder the slower action.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
