Posted by Inno on July 17, 2010 at 20:09:09 from (76.67.26.143):
In Reply to: Plasma or LCD TV's posted by jcsinga on July 17, 2010 at 17:33:34:
Personally............and I have been a TV technician for over 15 years, I would probably go with a LCD.
Plasmas use more power, are prone to burn in if you have a static image or from news tickers like CNN or Fox News have at the bottom of the screen, they use more power and are prone to failure if they don't have cooling fans installed.......if they do have cooling fans installed they can be noisy.
There's a LOT going on in a plasma set as opposed to LCD which has been around much longer.
Most of the new LCD sets are pretty much on a par with plasma as far as picture quality. Unless you are using a high definition source (satellite or digital cable) you won't be any further ahead with a plasma at all. In fact with any source that is not high def. you will likely see a worse picture than you did on your old tube set.
Having said that, if you are on an antenna and your local broadcast is in HD then you are in for a treat either way. It will look great with a HD source.
Stick with a name brand you recognize, stay away from bargain brands and too good to be true cheap Wal Mart crap.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Third Brush Generators - by Chris Pratt. While I love straightening sheet metal, cleaning, and painting old tractors, I use every excuse to avoid working on the on the electrics. I find the whole process sheer mystery. I have picked up and attempted to read every auto and farm electrics book with no improvement in the situation. They all seem to start with a chapter entitled "Theory of Electricity". After a few paragraphs I usually close the book and go back to banging out dents. A good friend and I were recently discussing our tractor electrical systems when he stated "I figure it all comes back to applying Ohms Law". At this point
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
