You kind of lost me with all of that. You cannot make an engine with inadequate torque do the same work as an engine with more, regardless of gearing. Otherwise, you could stick a 3 horse lawn-mower engine into your 1 ton pickup and pull a 10,000 lb trailer well - as long as you stuck in a 20 or 30 speed gearbox.
I'm defining "work" as pulling equal loads at equal speeds.
Getting away from paper-based calculations, my 94 Ford truck - versus my 92 Dodge is a good example. My Ford has a turbo 7.3 diesel with 4.10 axles. My Dodge has a turbo-intercooled 5.9 diesel with 3.50 axles. Seems the Ford with the bigger engine and better gearing ought to at least be able to tow the same weight the same speed on inclines? Nope - not even close. The Dodge with the poorer gearing does much better.
By the way, I also have a 69 Dodge truck with a 318 gas V8 and 4.88 axle gears. It couldn't do half the work of the other two trucks mentioned. I wonder why?
Gearing, wind resistance, friction, gearing versus torque-curve of the engine, peak horsepower at what RPM, etc. all play into it.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
Nice Marvel Schebler DLTX 8 bronze body carburetor For 1934-1936 unstyled A tractor.Serial No.410000-42850. All restored and ready to use.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.