Posted by tjiniowa on September 21, 2010 at 20:01:20 from (207.177.45.251):
Just finished overhauling the engine D361, with turbo. Ground crank, all bearings plastigauge .0015 to .0018, new cam, and cam bearings. Have good oil pressure when cold, but when it warms up it idles at 0 or just above. I put on a gauge with numbers to tell for sure. IF I rev it up good the pressure is close to 50 psi, then idle it down, it goes to zero, then may come up to .5 to 1 psi. The turbo is getting oil and so is the valve train. Is my oil pump the problem. Someone said relief valve, still have to remove the pump to work on that also. When I overhauled the engine I took the pump apart and cleaned it out real good. I checked the specs for tolerance around the gears, and they where within what the book said. Where should I start, do I need a rebuilt/new pump? Thanks.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
