Couldn't do some of it without a backhoe around (when working by myself). I'm also 60 years old and only weigh around 160 lbs. A bigger person could do more then I do.
CCA treated poles are the best of the the "experiments" over the years. And, CCA is still perfectly legal except in exposed residential use. The problem is, finding anyone that stocks it anymore.
The new chemical treatment is extremely corrosive to steel and aluminum. Thus the need for special hardware. Electro-plate galvanized not permitted. If galvanized, it must be hot-dipped.
One other thing to watch for. Most 6" X 6" treated poles sold as 10 foot or shorter, are NOT propertly treated for sticking in the ground. I found out that even many lumber yards don't realize this. So, let's say you need an 8 footer. You usually have to buy something over 10 foot and cut it down. A 16 footer works out nicely to make two.
I've had many problems in central New York getting the correct stuff. Just about none sold at Home Depot or Stock lumbe is. But, recently I was trying to buy poles for a pole-barn in northern Michigan. I told the guy I wanted a dozen 12 foot 6"X6"s for sticking in the ground. When I told him my concerns, he laughed at me like I was a clueless fool. Well?? Guess what. We walked out in his yard and checked his treatment labels. Even his 14 footers weren't treated for in-ground use. He was quite surprised. If the poles say "ground contact", that means they are NOT treated properly. "Contact" means touching the ground, but not stuck into it.
By the way, you are dead-on with the four-floor not being allowed. Long story how I did it. Basically, when it comes to my own properties, I am a chronic law-breaker (or bender). Main thing is, veer away from residential code when possible, and stay with farm or "hunting cabin" codes.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Museum Coverage: The Stuttgart Agricultural Museum - by Cindy Ladage. While cold wind was blowing back in Illinois, in Arkansas, daffodils were in bloom, and the Magnolia trees were adorned with fragrant blossoms. Stuttgart, Arkansas was the site of this year's winter Minneapolis Moline Collector's show February 25-27, 1999. The show was held at the Oliver Museum created by Don Oliver, the pioneer of the four wheel drive tractor. Oliver along with Gale Stroh and Kenneth Bull using Minneapolis Moline tractors and parts created what has become known as
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
