Ok, so I answered one of my questions, the weight of the backhoe is 2300lbs. That's a bit more than I expected but it gives me something to go on.
With much of the weight hanging way behind the tractor, the perceived weight on the tractor is also greater as the rear wheels act as a pivot point for a lever. It is my perception that the backhoe seems a bit too heavy at times as the front wheels come up off the ground easily and steering is difficult to say the least. So what I want is a setup that will keep the front wheels on the ground and I want to have a bit more down pressure than I have now without the wheels leaving the ground.
I almost have to hang some weight off the back and figure out just how much I think I need. Considering whatever I do install will be closer to the rear axle, the effect of the weight will be less as far as the front end lifting and more on holding the rear end down. So if I figured on 2000lbs hanging on the 3 pt. close to the rear axle I'd probably be close.............maybe? :?
So figuring that 1cu ft of concrete would weight between 130-150 lbs, I'd need 13 to 15 cubic feet of concrete. So a box 2'x2'x3.25' (for 13 cu-ft) or a box 2'x2'x3.75' (for 15cu-ft)..........or any other dimensions that equal 13-15 cu ft.
This post was edited by Inno at 14:24:32 10/06/10.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Gatherin of the Orange - by Rick Nikolich. In July of 1998 I was talking to fellow Allis Chalmers collector Mike Schilling about the annual "Gathering of The Orange" AC show coming up in August of 1999. He got this wild idea that we should get a convoy of AC tractors and drive them from Charlotte, Michigan 105 miles to LaGrange, Indiana.
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.