Posted by WA-Hal on November 17, 2010 at 20:11:12 from (208.81.157.90):
In Reply to: OT. engine question. posted by JayinNY on November 17, 2010 at 18:51:20:
350's are super common, but usually have some value as cores to rebuild. High performance engines are usually worth more than standard models. 4 bolt mains make a block worth quite a bit more than one with 2 bolt mains.
400 small blocks are getting somewhat rare and rebuildable 400's are probably worth quite a bit more than a standard, run-of-the-mill 350. The 400 uses a longer stroke crank and has huge bores. But they also require using cylinder heads that are set up with the right small coolant holes near the "siamesed" areas between the cylinders.
Unless the engines were ruined somehow (frozen, rod through the side, etc), they are probably worth more than their scrap iron value. It would pay to know just what you have, and there are books that have the part number information for almost any Chevy engine. If you do the research, maybe you might not sell something way too cheap.
I would guess that the 350's would be worth at least $50 each, but could be worth many times that, depending on what you have. A rebuildable, unhotrodded 400 2 barrel would probably start at about $250, but could be worth about $500 or more to someone who really needs it.
I don't know if it is still true, but awhile ago I read that a 350 Chevy was the cheapest V8 to rebuild, and one of the very least expensive of all car engines to rebuild. My guess is there will be a market for Chevy small blocks for a long time. Will your stash ever be a gold mine? Probably not, since there were MILLIONS of 350's produced. Lots less 400's. Good luck!
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Niagra View Mobile - Powered by a 1959 Ford Tractor - by Mark Massey. In 1959 the Niagara Frontier Transit Inc. of Buffalo, New York designed and built six Viewmobiles for the Niagara Frontier Sightseeing Inc. for use as a sightseeing ride at the Niagara Falls State Park, Niagara Falls, New York, powered by a 1959 Ford 611 Tractor.
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.