Posted by WA-Hal on November 18, 2010 at 21:06:27 from (208.81.157.90):
In Reply to: Engine Block Repair posted by Scott in PA on November 17, 2010 at 20:22:22:
If the fuel pump worked OK with the block as it is, and if that part of the engine is not highly stressed, I would probably just put the pump back on. Maybe carefully silicone both sides of the gasket first. If it didn't leak anything, I wouldn't worry about it.
On the other hand, if it really concerned me, I have read about a repair where multiple holes are drilled along a crack, and then tapped. Soft bolts are screwed into the holes and they are cut off flush. Then more holes are drilled between the newly filled holes so the new holes are partly touching the earlier installed "plugs". This continues until the whole crack is bridged by the screwed in "plugs". Such a repair is supposed to work very well, and make the part almost as strong as it was before it was damaged. I have never tried it, but thought it might be a useful idea to remember.
When I fix something, I like to make it "right". But lots of times, it really is not necessary and trying to fix things some ways can cost a LOT of money and might screw it up even worse. Good luck, hope it works out OK.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
