Posted by MeanGene1 on January 31, 2011 at 20:47:52 from (70.231.132.252):
In Reply to: F-600/391? 4Vor 2 V ? posted by j hitkemper on January 31, 2011 at 19:40:53:
Holleys are actually very easy to freshen up, you never did say how it actually runs now. Very rare that anything is actually wrong with one unless the gaskets dried out from sitting, and the newer gaskets don't shrink like the old ones. The main thing is to keep the governor functioning, if it's working right, let it be- just run some cleaner through it, set the acc. pump to spec, adjust the idle screw with a vacuum guage. If it's a 391, IIRC the governor would be at about 3400, and no need to spin it over 3000. They're actually pretty trouble-free engines, EVERY one I've seen that was grenaded had a car-type Holley on it without a governor, since the old carb needed a touch up, the owner priced a new governor carb and feinted, instead of putting a kit in the old one, and the drivers started running it at 4000+ rpm. They WILL grenade if over-revved, they CANNOT rev like a car 390- the bottom end parts are very heavy, and the large-stem valves are also heavy, and the valve springs are not for high rpm. Shift it at 3000, keep your foot out of it, and the mileage won't be that bad, and it'll chug along for a long time
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Niagra View Mobile - Powered by a 1959 Ford Tractor - by Mark Massey. In 1959 the Niagara Frontier Transit Inc. of Buffalo, New York designed and built six Viewmobiles for the Niagara Frontier Sightseeing Inc. for use as a sightseeing ride at the Niagara Falls State Park, Niagara Falls, New York, powered by a 1959 Ford 611 Tractor.
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
