Posted by 135 Fan on February 03, 2011 at 23:54:23 from (68.149.56.30):
In Reply to: Snowblower option posted by Rick Kr on February 03, 2011 at 13:29:37:
There are snowblowers like that. An angle blade or V plow for the loader would be a lot easier and cheaper though. If you wanted to run a blower off hydraulics, you'd need a pretty good sized pump and reservoir. You wouldn't get close to the same power as the PTO unless you spent a lot of money and used higher pressure like 3500 PSI. A hyd. blower will work good on a skid steer because they are narrow in relation to the HP and have a hydrostatic trans. I tried a hyd. rototiller on a skid steer and it wasn't even comparable to PTO driven one on about the same HP tractor. Dave
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
