This is by far the easiest way to measure the height but you stick need to be about twice as long. You need a stick that is long enough so that you can extend it out from your eye and grab a hold of it at that point with your outstretched arm. That is the part that you will be using to do the measuring but by having a longer stick it will be much easier to hold it vertical.
By holding the stick at the end of your horizontal outstretched arm the stick will extend above your arm the same distance as it is from your eye to the stick. With the stick vertical and your arm horizontal you will have a 90° angle with a 45° at your eye and at the top of the stick. Back away from the tree until the top of the tree is in line with the top of the stick. At that point the height of the tree is equal to the distance you are away from the tree plus the height of your outstretched arm. If you are working on a slope you will also need to take any change in elevation into account.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - George's Fordson Major - by Anthony West (UK). This is a bit of a technical info to add on to the article about George's Major in the "A Towny Goes Plowing" article. George bought his Major from a an implement sale about 18 years ago for £200.00. There is no known history regarding its origins or what service it had done, but the following work was undertaken by Harold alone to bring it up to show standard. From the engine number, it was found that the major was produced late 19
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.