Are you talking about a blade that fastenes to the rear and front axles with a cable lift to the rear? Never heard of a 8N with midpoint mountings. The 600 is the same as a NAA and would have the midpoint attaching bolts underneeth but they have a longer wheelbase than the 8N. The cable lift front blade will work on a NAA but you need to adjust the cable length but with that extra length you need to modify the front axle mounting plates as the frame gets narrower where they set and the frame does not have the rub rail going that far forward. Had one on the NAA for a couple of years before we put it back on the 2N, same size as the 8N, also used on the Ferguson, same exact fit as the 8N. On the shorter Fords and Ferguson the blade would angle to the side to max angle while on the longer NAA the angle would only go to the mid angle as at full angle it was hitting the front tires.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - George's Fordson Major - by Anthony West (UK). This is a bit of a technical info to add on to the article about George's Major in the "A Towny Goes Plowing" article. George bought his Major from a an implement sale about 18 years ago for £200.00. There is no known history regarding its origins or what service it had done, but the following work was undertaken by Harold alone to bring it up to show standard. From the engine number, it was found that the major was produced late 19
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
