Re: IH 268 diesel starter grind

Posted by Brownie 45 on June 25, 2006 at 17:08:37 from (207.177.82.242):

In Reply to: IH 268 diesel starter grind posted by Bobby B on June 25, 2006 at 10:29:45:

Make certain that the starter drive gear is the proper one for your application. Sounds like the mesh of the drive gear & ring gear could be too tight. If the starter mounting bolt holes are a bit large, try adjusting the starter away from the ring gear as far as it will go. Of course, the flange which locates the starter in the bellhousing is going to determine if you will have any leeway. Worth a try.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]