At least give it a try. You will have a good experience few people have even if for only a few hours.
Some of the posts have good points:
- Look for and older instructor and talk to his/her students if - possible
- Join EAA (Experimental Aircraft Assoc)
- Look for a flying club. Often may have 5 or more people, and some of the members never fly, but still pay their share of the fixed costs
- What do you weigh? If you are slim in trim, a C-150/152 will work. If you are more 'generously' sized, a C-172 or one of the low wing Pipers.
- If there is an active airport nearby, check it out and talk to whoever will listen. And listen to what they say.
- I figure fixed costs if you are owning your own plane, $100/month each for hangar, annual inspection, ins/taxes/registration. So $300/month fixed. Running costs, rough estimate of 3 or 4 times cost for fuel per hour to allow for maintaince and build up a reserve for OH or repairs.
- Lots of people build their own. If you are handy and like building, a very good option, but...you will not be flying while building.
- If you decide to buy - GET THE AIRPLANE INSPECTED FIRST. This could save you a TON of money. I had a friend looking at a plane, everything looked great, but the inspection turned up corrossion. $$$$$$$$$ to fix. He found a different plane, a real creampuff.
- One final point. If you are buying GPS's, fancy instruments, a leather jacket, or whatever. That is money that could be better used to buy fuel. A $250 leather flight jacket = 50 gal or fuel. 10 or more hours of flying.
Best of luck, and let us know how it turns out.
This post was edited by calf at 22:43:29 08/11/14 2 times.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - An Old-Time Tractor Demonstration - by Kim Pratt. Sam was born in rural Kansas in 1926. His dad was a hard-working farmer and the children worked hard everyday to help ends meet. In the rural area he grew up in, the highlight of the week was Saturday when many people took a break from their work to go to town. It was on one such Saturday in the early 1940's when Sam was 16 years old that he ended up in Dennison, Kansas to watch a demonstration of a new tractor being put on by a local dealer. It was an Allis-Chalmers tractor dealership,
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.