Posted by JD Seller on January 10, 2015 at 06:39:38 from (208.126.198.123):
In Reply to: Quick Hitch update posted by Texasmark1 on January 10, 2015 at 06:18:40:
I hope they work for YOU. They move the load back about 4 inches. This makes many top links too short to adjust the working angle correctly. Then watch the spacing bracket. It will hit any PTO shaft you try to use while it is installed.
City raised neighbor bought a Pat's setup a few years ago. He had torn up more stuff trying to use them than I can count. The most costly is PTO shafts. He ahs ruined 3-4 of them. Mainly with not taking the rod that holds the arms a set distance apart. He also has had the extra length on the arms make some shafts too short and them they slide apart too far.
I guess they can be a good thing but they are not golden either. Nothing is actually.
Most three point equipment is all different in the hitch dimensions. I do not think I have any two pieces that are exactly the same.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
