Posted by Billy NY on May 11, 2015 at 07:28:39 from (104.228.35.235):
In Reply to: Treated 4 posted by shunkfarm on May 11, 2015 at 06:54:11:
Sure, Copper Chromated Arsenate (CCA) was taken out of the consumer market '00 or early '00's. As was stated there were different treatment or saturations of same if that is the correct way to put it. .40. .60 were most common, one was touted to last 40 years, the latter 60 years, if I recall. .40 was a blue tag, and .60 was a red tag from the treatment plants we dealt with, I hauled tractor trailer loads of it directly from the plant, fresh and laden with CCA. EPA made this move regarding CCA
You can order it for farm, ag or commerical use, its not completely outlawed, but you will not find it at H-D or Lowes etc. You will find ACQ or another, one is ground contact, one is not, but its not the same as CCA. YOu have to be careful with fasteners as this newer treatment is not compatible with some types of fasteners, like deck screws, also remember those do not have any shear value at all.
I've seen it mentioned here, marine grade, fresh and salt water, if were me, I'd be ordering some of that from a lumber yard, or that detail below if affordable. Perma posts made of concrete would be great, but I priced them for our barn, too costly at the time.
Osmose was one name brand for many many years, but its change to Koppers now, heres a link to some information about CCA treated wood you may find useful
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
Nice Marvel Schebler DLTX 8 bronze body carburetor For 1934-1936 unstyled A tractor.Serial No.410000-42850. All restored and ready to use.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.