Posted by SnowStorm34 on July 23, 2017 at 14:05:27 from (70.49.5.88):
Hi everyone :)
Last year I made my first posts on the forum about trying to fix the brakes on a homemade tractor my Grandfather built in the early '80s.
I'm not someone who is very mechanically inclined, but with your help I managed to replace the wheel cylinders and get the brakes working again.
While they worked, they didn't work very well. For a summer project this year, I decided to go back into the drums see if the shoes also needed replacing. Once inside the drum, I discovered everything was coated with a small amount of oil.
Unfortunately, this is where my shallow expertise falters. I'm not sure what would be causing the leak. I have some photos of the axle, the hub, and the bearings. If anyone has any advice on what needs replacing/fixing, it would be much appreciated.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
