Well you really should just go ahead and get a heavier GVW trailer. 6000-7000 LBS. will not be heavy enough for the JD 60. They can weight that much by themselves so when you deduct the trailer weight your over loading the trailer. Also 3500 lbs. axles are not really heavy enough for anything but cars. I know you do not need or want a 14K trailer so look at a 10K trailer. The two 5K axles will be a better fit and not much more money than the 5-6K trailers cost. I would also recommend getting brakes on both axles. A lot of the cheaper trailers only have brakes on one axle in that weight class. Also dual jacks are nice too. Most just have one in the center so unhooking loaned is not a good idea. I also had them put extra stake pockets on each side and a winch plate on the front. The dual jacks, winch plate, and the extra stake pockets only added $350 to the cost but I think make the trailer much better to use. Paid $4000 for it 3 years ago. Only took 3 weeks to have it built and delivered.
I have a Lamar 14K 7 1/2 ft. wide 20 ft. long, bumper trailer. It is not a deck over but I really like it. They make deck overs too but I wanted the lower load height so hauling cars is easier.
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Talk of the Town: The Saga of Grandpa's Tractor - by The following saga is from the Tractor Talk Discussion Forum. Someone. The saga starts with the following message: Hey guys I have a decision to make. I know what you all will probably suggest and it will probably agree with me way down inside, but here it is. I have a picture blown up and framed in my "tractor room" of a Farmall M. It was my Grandpa's tractor, of which whom I never got to meet. He froze to death getting this tractor out of the barn to pull a truck out of the ditch before I was born. Anyway my dad and aunt had to sell it at the auction,
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
