Posted by sotxbill on May 24, 2019 at 06:27:11 from (104.5.24.112):
In Reply to: Motor oil posted by john in la on May 24, 2019 at 05:16:19:
Extremely good oils are made from this base. These oils are good for extreme use... such as extremely cold...
Almost as good oils are made by hydrotreating dino oils resulting in an group III oil that is 95 percent as good has the group 4 and group 5 oils and work as well in most applications.
SO.... if you constantly operate equipment at 50 below zero, you need the better oil... If you run your oil temperature above 275 degree, you need the better oil. For the rest of us, the group III oils and blends are just fine and will perform just as well in most environments.
In Siberia, at 50 below, all engines are started in a heated garage, and must NOT be turned off out side or they will not restart. In outerspace, the group iv and group v oils must be used.
In the US, we have great oils and greater oils for the most part. Unless you buy a single weight non detergent oil, your will get a medium to great oil.
In europe, they have ratings for regular oil, light duty diesel oils, and heavy duty diesel oils so one must be a bit more careful in selecting oils for the correct application.
Upload one or more videos to your post. Photo and video filesizes should be less than 8MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
