Posted by pinball on June 24, 2019 at 12:11:07 from (199.36.83.129):
In Reply to: 8N posted by 3/9semfi on June 24, 2019 at 04:14:07:
the biggest problem with the n tractors they are not live hydraulics. putting an over riding clutch on your pto will help you with brush hogging. if you keep the 8n garaged, run it every few days, convert it over to 12 volt it most likely will run fine anytime you need it. let it sit to long, outside in the elements you asking for trouble. I have had 3 8n tractors. wont have anymore. there are other tractors out there that are a whole lot more versatile and dependable than those. there selling around here for under 1000 dollars now. there market has really gone south. I would shop around and don't get in a hurry. power steering is nice but not a necessity. live hydraulics is a must and live power is very nice to have. just remember when you buy an implement to put on your tractor they are rated for that. go any bigger and you might cause problem in rear ends. good luck on what ever you do cause as always its the buyers decision.
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Engine Valves - Some Helpful Information - by Staff. Intake - On the intake stroke the piston moves doward, sucking in carburized fuel through the open intake valve. Exhaust valve is closed. Compression - With both the intake and exhaust valves closed, the pistons upward stroke compresses or squeezes the fuel into the combustion chamber. Firing - Ignited by the spark, the compressed fuel explodes and forces the piston downward on its power stroke. Intake and exhaust valves are closed. Exhaust valves and seats are exp
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
