Posted by Steve@Advance on November 20, 2019 at 05:05:47 from (24.182.105.128):
In Reply to: Ferguson to-30 posted by Ferguson to-30 on November 20, 2019 at 03:35:16:
The rubber seal goes in first, spring side toward the engine. If there is a stop ridge in the cover, set the seal all the way in against the stop, otherwise put it flush with the inside of the cover.
Then the felt seal goes against the rubber seal on the outside. Slide the felt over the pulley hub to prevent fibers from getting pushed into the seal.
But, if there is not enough room, leave the felt out. Don't want it tight, it will get hot and ruin both seals. The seal and felt are aftermarket items, possibly they are not the same thickness as factory seals.
Be sure to oil the seal lip. I put a little silicone under the washer behind the nut to stop oil coming out around the shaft.
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Box Plow Blues - by Tom Schwarz. One of the first implements most tractor owners obtain is the box plow. For very little money, this piece of equipment promises to plow and flatten any hill or vale on your ranch road or farm. At least that's what I thought! As simple as a box plow appears, it can be rather challenging to make work correctly. In our sandy soils of Florida, traction is king. You can never have wide enough tires or heavy enough weights to get all the traction you want … unless you own a monster tractor. U
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
