Posted by bpanning92 on November 30, 2020 at 08:56:46 from (174.198.74.136):
I picked up a farmall 300 last summer and it ran great up until a month ago and started missing. It will run on #2 and #3 but when I pull plug wires on 1 and 4 there’s no change. I have spark to 1 and 4 if I hold the plug about 1/8” from the block but no spark when grounded directly. I put new plugs, cap, wires on it. Checked compression and put good gas in it. It has a 12v battery positive ground but still has a generator and 6v coil (I’m assuming since it ohms at 1.4). There is a 12v sylnoid on the starter. Looks like a newer voltage regulator but Im not sure If it’s 6v or 12v. Is there a way to tell if it has been converted or if the guy I bought it from just threw a 12v battery in it? Kind of chasing my tail here since the manuals I have may not have the conversion info in it.
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
