Tractor Talk Discussion Board |
Re: 1974 Economy tractor transmission prob
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by wdTom on March 27, 2004 at 18:48:26 from (155.212.223.38):
In Reply to: 1974 Economy tractor transmission prob posted by Jim on March 27, 2004 at 17:13:29:
I would look at the pedal adjustment to see if it is releasing as much as possible. Most clutch pedals need to have 1/2" to 3/4" "free play" before the linkage takes up and starts to release the clutch. You measure it at the pedal. Mostly you can depress the clutch with one or two fingers, then at the end of the free play it will suddenly get harder and begin releaseing the clutchl The less free play you have the more the clutch will release. Another thing to check is the level of oil in the transmission. And possibly it's viscosity. If the oil level is low the gears will spin and spin before stopping. You may still have enoghh oil to lube it but not enough to help slow it down. And if you have recently changed it and put in "tractor lube" or a thinner oil that could do it too. If the clutch seems to be releasing try putting some 90 weight gear oil in the transmission if it doesn't already have it. If you haven't changed it since it was new it could use a change by now. Hope this helps.
Follow Ups:
Home
| Forums
Today's Featured Article -
The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
Latest Ad:
18-32 Case Cross Motor
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|