Tractor Talk Discussion Board |
Re: 220 wire size Hello buickanddeere and T-Bone
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by john in la on July 29, 2005 at 22:31:13 from (67.35.234.62):
In Reply to: Re: 220 wire size Hello buickanddeere and T-Bone posted by buickanddeere on July 29, 2005 at 09:24:54:
Ok lets deal with the inside unit first. It is the one in the picture with the 60 and 30 amp breaker. You are saying I should use a 80 amp breaker in the house 200 amp box and then run a 4/2 with ground wire from this breaker to the inside A/C. How will I divide or hook up this 4/2 to supply power to the two breakers in the A/C???? (60 and 30) I can under stand that having two breakers in the house box for the same A/C would be confusing. Turn only one off and thinking power is off you get a real jolt because you did not turn both off. Next........ The 40 amps is for the outside unit. I have a single 220 breaker box mounted on the outside of the house next to the compressor with a whip going to the unit. There will be a matching 40 amp breaker in the house 200 amp box. Thanks.
Follow Ups:
Home
| Forums
Today's Featured Article -
The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
Latest Ad:
18-32 Case Cross Motor
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|