Re: Aluminium Foil and Vapor Lock

Posted by the tractor vet on December 10, 2005 at 08:41:45 from (4.124.70.15):

In Reply to: Aluminium Foil and Vapor Lock posted by Tham on December 09, 2005 at 20:28:58:

First off gas starts to boil at around a 120 degrees and with low flow it is getting hot in the line and yes you can wrap it with foil or put clothes pins on it and you can wrap it with insulation and foil and also now this is going to get real tech. You can put a Tee just before the carb with a real small pin hole on the one side of the tee i have always used a # 60 drill , what i do is fill the one side of the fitting with soider and drill a hole in the soider then run a small fuel line back into the fuel line away from the engine so the fuel can cool and get ride of the bubbels this allows the gas to flow and cool off .

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]