|
Tractor Talk Discussion Board |
1995 Dodge Ram 4x4 front axle engagement for four
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by REYNOLDS on January 15, 2007 at 19:47:23 from (67.72.98.45):
Hey every one need some help!
I have a 1995 Dodge ram 1500 4x4. The front axle I have replaced the front vacuum shifter motor. The lines connecting to the shifter motor have good vacuum they will stick to your finger. When the motor is off the axle you can see it shift and the light comes on indicating 4wd. The transfer case locks in 4hi and 4lo when the truck is up on jack stands the front wheels locked when placing it in 4 wheel. The front axle is good on the inside even when the truck is on the ground you can take one finger and slide the gear into place with no resistance at all. I have tried switching the lines(vacuum)and when going down the road the light for 4wd will come on and go off like when going down a hill before switching THE LINES. Would like to have it fixed for snow don"t want to get trapped at work, home would be fine but not work. Would have a local mech. look at it but it"s hard to find one you can trust or afford around here have had several bad dealings not with this truck but others. I was thinking about getting the posi-lok to fix this but would like to keep it stock and was worried if they work with the indicating light.
Any help would be greatly appreciated.
Replies:
Home
| Forums
Today's Featured Article -
Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
Latest Ad:
18-32 Case Cross Motor
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
