Posted by Nebraska Kirk on August 17, 2007 at 18:14:23 from (207.91.30.68):
This shed started out as a 50x400 building that was once used for raising turkeys. Now the owner of the property wants to get rid of the buildings (there are two). A local moving company is cutting the 400 foot long buildings into 4 sections and moving 100 foot at a time. The sides had to be removed to be able to go down the road (there are several very tight spots!) Once the shed reached it"s destination, we welded the bottom 5 feet back on each steel truss, then raised the building up so that the walls are 12 feet tall. Drilled post holes, set 6x6s and bolted them to the legs of the steel trusses. Now just have to tin the sides! As you can see, it is filling up fast :-) One of my brothers is getting two of these sheds and once he gets his set up he can put his hay in his own shed ! LOL
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
