It has been said by some of the most experienced welders, that the biggest cause of frustration for a beginner welder is having a cheap AC buzz box to try and learn on. The differnce between a decent welder like an Idealarc 250 AC/DC Lincoln and a buzz box is night and day. Instead of going to all the trouble of finding a High Freq. and hooking it up to a less than desirable buzz box, why not just get a better welder? High frequency isn't for stick welding. It is mostly for TIG welding non ferous metals. A good welding machine will last a long, long time. Good used machines are also out there. $500 or even $1000 on a machine that will probably last your lifetime and save you thousands more seems like the most logical choice to me. If all you can afford is a buzz box, expect that you're going to do a lot of cursing and get really frustrated with it. Sorry. That's just the way it is. With lots of practice you can do an OK job with a buzz box but why? Try a good DC welder for a few minutes and you'll never want to go back to a buzz box. It really is a night and day difference. Dave
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
Nice Marvel Schebler DLTX 8 bronze body carburetor For 1934-1936 unstyled A tractor.Serial No.410000-42850. All restored and ready to use.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.