Posted by Earl -IL on June 30, 2008 at 17:35:21 from (71.171.244.155):
In Reply to: Bearings posted by Lanse on June 30, 2008 at 12:49:00:
Lanse, Is this the B-C Allis ? If it is # 1 crank is reground to correct undersize.#2 Correct undersize bearings . # 3 you will need a new .009 shim pack to start with.That is a lamenated (3ea. .002)(1ea. .003)pack .009 on each side of rod. Torque to 35-40 ft pds. Rod caps need to be on correctly. The same type of pack is need for the mains.If you can't find the shim pack. email me & will try & find them for you.I have done engine rebuilding for 40 plus years. We all had this problem when we started out. If you email me I will give you my ph. number & when you can call & I will walk you through this.I can call you if you if this would work. Just start by what I posted here. Earl
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
Nice Marvel Schebler DLTX 8 bronze body carburetor For 1934-1936 unstyled A tractor.Serial No.410000-42850. All restored and ready to use.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.