Posted by the tractor vet on October 06, 2008 at 11:43:01 from (99.167.208.219):
In Reply to: IH766 hydraulics posted by za766 on October 06, 2008 at 11:10:46:
My first thing i would do is change the filter . IF the oil looks milky then i would drain the system and install new Hy Tran . When ya get the filter out tear it apart and take a real close look at it . As far as the over fill it will not hurt a thing . As to the hyd pumps in your tractor i don't have a clue as to them being good bad or ugly . And with out having someone that has a FLOW RATER do the whole test of the main hitch pump and the MCV pump we are all guessing . So i am not going to tell you to run out and buy both pumps . As to why it did this well mybe it was the fliter being plugged a bit maybe the o/ring between the range transmission and the speed transmission is hard and not sealing well maybe the mcv pump is just getting weak . As for changing out the pumps yourself ya it is not hard but there are somethings that you would need to know BEFORE ya start and not till after you are done. So here is where having atleast and I T Manual comes into play.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - George's Fordson Major - by Anthony West (UK). This is a bit of a technical info to add on to the article about George's Major in the "A Towny Goes Plowing" article. George bought his Major from a an implement sale about 18 years ago for £200.00. There is no known history regarding its origins or what service it had done, but the following work was undertaken by Harold alone to bring it up to show standard. From the engine number, it was found that the major was produced late 19
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.