Posted by eastexan on November 23, 2009 at 17:54:30 from (96.15.3.166):
T_Bone said: (quoted from post at 17:03:46 11/23/09) Hi Ronnie,
Always use screws on the ridge to keep leaks down.
Screwed in the valley guarantee's a leaking roof at some point in time.
The neoprene washer is to allow slight movement of the SM without pulling threw the screw head, during high winds.
Never use nails, period.
A standing seam roof is the best type of joint. 100% seal with less screws used but not on a corrugated roof. On a CR you will save approx 25% of screws but increase the labor time for standing seams.
Butyl caulk is your friend. The best caulking around-- bar none.
T_Bone<--- 45yrs Retired SheetMetal Worker
Thanks, T_Bone.
Could you clear up a couple things for me?
What is a standing seam roof?
And are you suggesting to use Butyl caulking where the pieces of CR overlap?
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
