Posted by super99 on January 06, 2010 at 15:19:36 from (74.32.242.182):
I have a question for anyone who has any experience with in floor heat. Our tractor club put up a new building last summer with tubing in the floor for heat. Building is up, but heat is not hooked up yet. Which is more economical for heat source, hot water heater or a demand type heater? I know the system needs antifreeze in it, but will it make the cement more likely to crack if the heat is not used after filling system and start up? We haven't finished hooking up the system yet, some of the guys are saying it has to be heated or the cement will crack and possibly break the pipes, others say that it won't make any difference. We really don't want to pay for heat when we are not using the building, but we don't want to run the risk of the floor cracking and possibly breaking the tubing. Building is fairly well insulated, but the temps have been below 0 for the last week or so. What are your experieces? Thanks, Chris
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Engine Valves - Some Helpful Information - by Staff. Intake - On the intake stroke the piston moves doward, sucking in carburized fuel through the open intake valve. Exhaust valve is closed. Compression - With both the intake and exhaust valves closed, the pistons upward stroke compresses or squeezes the fuel into the combustion chamber. Firing - Ignited by the spark, the compressed fuel explodes and forces the piston downward on its power stroke. Intake and exhaust valves are closed. Exhaust valves and seats are exp
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
