Tractor Talk Discussion Board |
Re: 220 wire size Hello buickanddeere and T-Bone
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by buickanddeere on July 28, 2005 at 11:02:45 from (216.183.136.2):
In Reply to: 220 wire size Hello buickanddeere and T-Bone posted by john in la on July 28, 2005 at 10:25:57:
Don't worry. It's mostly questions such as the following that get the scathing remarks. Requests for info that is are clearly stated in the machine's manual(s). Lead additives for unleaded fuel, single weight Vs multi weight oils, oil change intervals and detergent vs. non detergent oils. I assume this AC system is setup 40ft from the building’s power distribution panel? There must be a resistive heating system built into the inside evaporator unit when it rated for 60.0 Amp? I wonder what the 30.0 amp is for? That's an awful large fan? Is this a water sourced heat pump or something? Most electrical codes and common sense requires a single isolation point be able to de-energize the whole AC system. Depending on which loads are motors and if they are centrifugal fans, scroll compressors or reciprocating compressors. The starting inrush current amount and duration of the inrush affects breaker and wire size. This maybe a situation where a common supply over to a main disconnect and local breaker panel right at the AC unit maybe required? Getting into wire this size I like to run it in conduit. It's certainly not any more expensive and it's well protected. Measuring a string pulled through the conduit then cutting the wire to length right off the venders rack reduces waste/$$$. Just depending, driving a ground rod(s) right at the outside AC unit maybe required or just a good idea. If trenching conduit into the ground, laying the bare #6 ground cable in the dirt works very well.
Follow Ups:
Home
| Forums
Today's Featured Article -
An AC Model M Crawler - by Anthony West. Neil Atkins is a man in his late thirties, a mild and patient character who talks fondly of his farming heritage. He farms around a hundred and fifty acres of arable land, in a village called Southam, located just outside Leamington Spa in Warwickshire. The soil is a rich dark brown and is well looked after. unlike some areas in the midlands it is also fairly flat, broken only by hedgerows and the occasional valley and brook. A copse of wildbreaking silver birch and oak trees surround the top si
... [Read Article]
Latest Ad:
18-32 Case Cross Motor
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|