Posted by pics on March 24, 2008 at 03:02:19 from (4.154.240.41):
I have a Farmall 400 that I want to use in a stationary application. I don't need 50hp. 25hp at rated RPM would be adequate. I was thinking of:
1. pulling two pistons and con-rods 2. plugging the two crankshaft journals (and hose clamping the bearings back on the empty journals) 3. removing the corresponding push rods, rocker arms, (and tappets ?) 4. running a Super H or 300 carburettor.
The two remaining pistons will have strokes 180 degrees apart. This means the firing impulses will be 180 and 540 degrees apart.
Does anyone see a problem with the uneven firing or any other aspect of the modification? Is there any advantage in which set of cylinders remains functional? 1&2, 3&4, 1&3, or 2&4. Can the con-rod/piston assemblies come out without removing the head?
No, I am not going to paint the tractor green with yellow wheels.
If Schramm made a head for this engine, I might be interested although I am not doing the modification to compress air.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - George's Fordson Major - by Anthony West (UK). This is a bit of a technical info to add on to the article about George's Major in the "A Towny Goes Plowing" article. George bought his Major from a an implement sale about 18 years ago for £200.00. There is no known history regarding its origins or what service it had done, but the following work was undertaken by Harold alone to bring it up to show standard. From the engine number, it was found that the major was produced late 19
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.